WST supply Ti6Al7Nb bars according to ISO 5832-11 and ASTM F1295 standards

   Ti6Al7Nb are broadly used in bio-medical fields. Ti6Al4V alloy currently having most applications is queried because of containing poisonous V element for body cell, so Ti6Al7Nb alloy is best replacement through using nontoxic Nb element instead of V
Due to good bio-compatible and low elastic modulus,
element. WST supply Ti6Al7Nb bars according to ISO 5832-11 and ASTM F1295 standards, mainly used for joint replacement and trauma products etc.

WST can supply Ti-3Al-2.5V wires in size of dia.2.0mm to dia.6.0mm according to ASTM B348 standard

 Ti-3Al-2.5V is a kind of near α titanium alloy, whose tensile strength at the room temperature and high temperature are higher by 20% to 50% than that of CP titanium, and welding and cold forming performance are more excellent than that of Ti-6Al-4V. Beta transfer temperature of Ti-3Al-2.5V is around 925℃.Microstructure of Ti-3Al-2.5V is equiaxed alpha phase and a few beta phase in annealed condition and elongated alpha phase in cold process condition

   WST can supply Ti-3Al-2.5V wires in size of dia.2.0mm to dia.6.0mm according to ASTM B348 standard, which are mainly used in manufacture of welding structure parts that require higher tensile strength and good cold forming performance, and high-end spectacle frames.

Ti-6Al-4V ELI Titanium hot drawing Products

    Ti-6Al-4V ELI alloy has higher strength and good processing performance, which are widely used in medical industry and covers a broad range of applications including joint replacement, dental implants, bone plate for fracture fixation and surgical instruments.

Ti-6Al-4V Titanium hot drawing Products

 

  Ti-6Al-4V is a kind of typical α＋β titanium alloy, which is of medium/high strength, excellent fracture toughness, fatigue performance and good processing performance. Ti-6Al-4V alloy has most widely application scope at present, which are mainly used in manufacture of aircraft structure, engine blade and fastener ect. WST can supply a wide range size of Ti-6Al-4V finished products with dia.1.6mm to dia.400mm in form of billets, forgings, slabs, bars, rods and wires according to various industry specifications. Currently Ti-6Al-4V alloy is one of WST’s typical products.

what is Titanium Section

 The section products convert bar material to a variety of configuration by cold process fabrication including titanium arc plate, titanium hexagon bars, titanium section for hinges and locks used for medical, fastener and consume industries. All kinds of section products can be designed according to customer’s drawing or special requirement.

 Size Range:

Titanium Arc plate: over 60 general sizes in a variety of shape
Hexagon bars: S7-S19mm

Tolerance:

+/-0.10mm on width and thickness depending on section

Length: 

1000-3000mm random

the knowledge of Titanium cold drawing Products

   Cold drawing products are available by roll-die drawing machine from WST in various alloy and standards, which have excellent surface condition of cold process with tight tolerance. Following heat treatment will be done under vacuum technology so as to keep surface condition of cold process.

 Size Range:
 Coil Wire: Dia.1.6mm up to dia.6.0mm
 Tolerance:
 Dia.1.6mm to dia.4.0mm  +/-0.02mm
 Dia.4.0mm to dia.6.0mm  +/-0.03mm

Contact Us
Stay in touch with Western Superconducting Technologies:

Address:No.12,Mingguang Road,Xi'an,Shaanxi,China

Zip:710018

Tel:+86-29-86514515,+86-29-86514505

Fax:+86-29-86514503

E-mail:market@c-wst.com